Medallions
I sculpted quite a few different medallion designs including various rabbit breeds, goats, chickens, and horses. I still have some stock available if anyone is looking but I cannot promise I know where anything is. Most of what I have left is the rabbits. I do not have any horse designs left in stock. Most of these were approx 3-4" in diameter, all cast in polyester resin and hand finished.
"Franklin"
NEW Shetland Pony bust
Franklin measures 5.5" at the top of the ears.
Unavailable
Franklin measures 5.5" at the top of the ears.
Unavailable
“Playful Banter”
The “Playful Banter” medallion/plaque is now available for order!
These will start shipping in mid April. At this time I will be casting them in house.
This is a large piece compared to the standard model hobby medallion. It’s 11” wide x 7.5” tall and the thickest point is about 1.5”. The background is done in a vaguely Mid Century Modern style and allows lots of freedom in finishing. I’m truly excited to see how creatively they get finished up. I would like to produce these again later in ceramic or metal.
Unavailable at this time
These will start shipping in mid April. At this time I will be casting them in house.
This is a large piece compared to the standard model hobby medallion. It’s 11” wide x 7.5” tall and the thickest point is about 1.5”. The background is done in a vaguely Mid Century Modern style and allows lots of freedom in finishing. I’m truly excited to see how creatively they get finished up. I would like to produce these again later in ceramic or metal.
Unavailable at this time
"PepperPoni"- Shetland pony mare
Meet PepperPoni! She's a 1:9 scale pony mare, ready to canter into your herd. This darling little mare is being cast right now and is available for order and quick shipping!! She's being cast by Dabar, with wire reinforcements. This is a ONE MOLD RUN of 50-75 depending on how the mold holds up.
She measures 7" tall, 9.5" long, ad 3" wide and is the same size as Lil Rio, making her a sweet companion.
EDITION CLOSED at 30ish
She measures 7" tall, 9.5" long, ad 3" wide and is the same size as Lil Rio, making her a sweet companion.
EDITION CLOSED at 30ish
"Lil Rio"
This portrait of my real Miniature horse stallion, Zephyr Woods Grand Lil Rio, is 8.5" at the tallest point. He's solid cast. Limited to one mold (50-75 castings).
SOLD OUT
SOLD OUT
"Tikva"
1:9 Traditional scale Arabian mare, in a frolicking canter. She has had a waste mold made, and I have a solid casting now that i am cleaning up and detailing. She will be hollow cast with a small puddle base under her left hind leg.
I had hoped to have her available for ordering over 3 years ago, however she has had far more clean up on her casting and further detailing needed. In the end I just did not have the finances to produce her. One casting (shown) was created in house, and will be the only one unless I have her shrunk and cast at a smaller scale.
Release Date: none
I had hoped to have her available for ordering over 3 years ago, however she has had far more clean up on her casting and further detailing needed. In the end I just did not have the finances to produce her. One casting (shown) was created in house, and will be the only one unless I have her shrunk and cast at a smaller scale.
Release Date: none
"Benedyct" - Welsh Cob stallion
Benedyct is a classic scale (1/12) Welsh Cob stallion sculpted in the flying phase of the trot. His cobby body is held mid air by a clear rod. His base is cobblestone around the sides with grass on the top and a small friend hidden among the stones. What a chunky stud muffin! He measures just about 12" from the tip of the tail to the front of his base, and 7.5" tall. He is approximately the same size as the Breyer Classic Arabian Stallion. (Castings are shipped unpainted. Photo for example only)
He was limited to 1 mold (50ish castings).
He was limited to 1 mold (50ish castings).
"Adiya" - grazing Arabian Broodmare
Traditional scale grazing Arabian broodmare. Almost finished. Pics show rough cast out of the master mold. She has some issues I need to fix, and I am not sure if she will ever be finished.
Estimated Release date -none
Estimated Release date -none
"Tot" - Sitting Miniature Horse Mare
Tot is a traditional scale Miniature Horse, so she is about the size of a small classic scale adult horse. She is 3 3/4" at the top of her ears, and about 7" in total length (nose to tail tip).
Edition closed at 50 castings.
"Evelynn" - The Itchy Cob Mare
She was available for order at $205 including shipping in the USA. She is a one mold release (approx 68). SOLD OUT
Evelynn is a traditional size (Trad scale) Gypsy Cob mare to be cast by poly resin with wire supports in her legs. She stands 6.5" tall at the withers, and is slightly larger than the Proud Arab Mare.
Note: "Evelynn" is built on an armature that was a Breyer horse. Some people may not wish to purchase her for that reason. I have NEVER hidden this fact. It was a simple oversight to have not had it on this page from the beginning. Anyone that has followed any posts on my FB studio page has seen the progress photos and has been told many many times. In fact I originally did not plan to cast her for that reason. She was to be a OOAK Drastic Custom. There was such an outpouring of support and urging to cast her though, and the need for funds to bring our little boy home, that I did go ahead and cast her. She is the LAST piece I will EVER cast from a drastic custom. Thanks for your support.
Evelynn is a traditional size (Trad scale) Gypsy Cob mare to be cast by poly resin with wire supports in her legs. She stands 6.5" tall at the withers, and is slightly larger than the Proud Arab Mare.
Note: "Evelynn" is built on an armature that was a Breyer horse. Some people may not wish to purchase her for that reason. I have NEVER hidden this fact. It was a simple oversight to have not had it on this page from the beginning. Anyone that has followed any posts on my FB studio page has seen the progress photos and has been told many many times. In fact I originally did not plan to cast her for that reason. She was to be a OOAK Drastic Custom. There was such an outpouring of support and urging to cast her though, and the need for funds to bring our little boy home, that I did go ahead and cast her. She is the LAST piece I will EVER cast from a drastic custom. Thanks for your support.
"Svelte"
Traditional scale warmblood colt. Sold out. Approx 50 sold. Released in 2006.
"Happy Feet"
Littlebit scale Morgan stallion. Very limited release (15-20 or so). Sold out. Released in 2005.
"Sababa"
Classic scale Arabian broodmare. Sold out. Released in 2000. Approx 25-30 sold.
